Відео

Rocktron zombie i must be doing something wrong 🤔

Can this pedal do ambient tones?

The Behringer V-Tone is excellent, especially for the money. I bought one in an emergency when my preamp stopped working at a soundcheck late on a Friday afternoon. Luckily, there was a music shop not far from the gig. I bought a V-Tone pedal off them for 60 bucks (Aussie dollars) and got through the gig. I liked it so much, I bought another one the next day, and didn't bother getting my preamp repaired for ages. They are also durable. Mine still work perfectly, despite 10+ years of kicking them, dropping them, etc, etc

I was still deciding if I should buy this one or not as I'm not a big fan of bluesbrakers. Your review made me buy it. Cheers!

I like a dimed Muff as much as anyone and a Muff in front of a Wampler drive with a 3 band EQ is my main distortion sound but I think there are definitely useable tones as low as 9 o'clock on the current EHX NY Big Muff. Diming the sustain is great for solos and power chord riffs but it diminishes note definition when playing anything beyond power chords.

one of my favourites with 6ixty 5ive

THIS OR NUX PLEXI?

Again missed this one too buddy, YT algorithm all to whack💔🙄🙄 Another great video. I've never committed to a PB, but I quite like the clamp types🤔🤔 The pedal board video series would be great, I'm a bit out of practice, so knowing decent set ups would be a boon👍👍🤞🤞🙏🙏✌️✌️💜💜

Would you say this would sound good on bass or not

mooer black secret 1:1 clon

Best demo ever

I don't why I missed this video🤔🤔😕 Another interesting one. There's some decent tones there and they're heading in the right direction. However, I feel that the guitar is key really, all the out of phase stuff on the RS, I suppose a Fender Strat Elite might get close (but they're noisy)🤔🤔

Does it really have a TRS out? I tried to run mine to 2 amps and only one got a signal.

king rat vs black rat ?

Thompson Dorothy Jones Jason Thomas Joseph

turbo 2 ha a huge mid hump at 1 khz. for me it's good only trhough a slight overdriven amp to achieve a little bit, but not the exact sound, of swedish chainsaw death metal sound, but more definited than hm-2 sound. i use my ds-2 as my main distortion but it could be a little tighter on bass response for rythim metal sounds.

Received mine a few weeks ago. I love it. My only complaint is that it’s hard to make it subtle with the wet dry mix. Wish there was a bit more range in that 7 to 9 o’clock sweep. Maybe the original does a better job at that. But it’s one of the best “cheap” pedals that I own.

Ant get enough of distortion pedals, they are a fav & I liked the subtle differences that this NUX pedal has on display here. Would be very keen to hear he FLB range of pedals especially under your honest opinion & superb playing 👍

9 o clock, sweet n mild 10 o clock buttery 12 o clock crispy but not that hard 5 o clock a bit crunchy Yes for me.

I have this and the Echo Square model on my board. So good for the price

To make the sound a bit more full without getting dreamy, dwell at 0 and mix at noon or what you recommend?

What amp exactly?

Can this pedal be used with external MIDI control?

Sounds similar to my 1979 JMP

Not quite my cup of tea - but then I'm not a big fan of the Marshall sound. Two little, small form distortion pedals that I would commend - both by Donner are The Morpher and The Dark Mouse. A larger format pedal is The Fat Ox by Metal Ox, but it has a 3 band Eq, making it possible to get some really nice distortion tones from that thing.

Have you check treble bleed knop at circuit?

Thank you! I stumbled upon this brand on IG, i've been a bass player for quite a few years. And has been keen to get into guitars, but just don't want to pay too much for a entry-level guitar. This seems fair enough to keep for a while just to see if guitars are something i want to get into.

Just bought it myself. Looking forward to playing it.

It's similar in everything to Kokko's distortion pedal

can it be used as a preamp into effect loop?

Great demo as usual Chappie. I have a 1991 from FLB and its a great pedal and he's a very nice guy.

I read about the gear you used in the description and just have one question. How did you demo this pedal through patch and instrument cables without guitar or amplifier?

Joyo sweet baby can use to boost up Your volume a lot while the sd-1 is also a good overdrive with compressed but not much power to give you volume

Thats prettry sweet actually. From the name i had assumed it was some sort of EVH 'brown sound' pedal....is it kind of??

Thats an awesome one mate, loving that tonality, and......as always your riffage✌️👍😊😊 Yes please to a FLB video👍🤞👍😊

I just ordered the orange burst. It sounds great in demos and the new pedal is cool looking lol

Just picked one up in a pawn shop for 20 bucks, mint condition in North Carolina. Cool beans 😎🤓

I just ordered this, the vintage delay and chorus pedal from behringer

Sounds pretty good, smooth

Nice video! I like products like these for really two reasons: first would be a budget pedal board and second would be a "my first pedal board" experience. If you gig regularly this is probably a good way to start getting your sound or a good solid "mini board" if you have a much bigger and expensive board at home. For these inexpensive power supplies, it's a coin toss if they REALLY ARE isolated. I personally would go with "no" until I play it for some time. I think ideally this would be great for a mix of two Standard (Boss) sized pedals and three or four mini pedals. Two types of pedals that I would not recommend for here would be what I call "Elevated Pedals" (a production pedal that is more premium, price wise starts creeping up towards Boutique pedal prices and has a bigger milliamps draw) and Boutique pedals. The reason being is if you can afford a $300 pedal you should put it on a well made board. For the power supply you will need to check the milliamp draw on the pedals because a hungry pedal is just going to wreck the enjoyment out of playing a pedalboard and will be a never ending source of issues. This would be ideal for budget pedals (and yes, even if you use budget pedals do yourself a MASSIVE FAVOR by buying better patch cables (noise, failing, gremlins, etc...) for your board. All said and done this board with some good used and new Standard and mini pedals and good cables will set you back $250-$400 depending on what you buy new and used and how much you swap out pedals. I have three pedal boards, a Main Board with 12 pedals on it (probably will get one more mini pedal), my OG Pedal board from 20 years ago with 7 pedals, and a "budget board" that is made from a skateboard deck and 5 pedals. This is close to my budget board where I have around $340 tied into it all said and done. The skateboard deck was new and that was $70 (really beautiful Antihero brand board), anchor points and zip tied daisy chain power supply (I also have one of these on my OG board because 20 years ago, that was the standard practice). The pedals themselves cost either $35 or $50 each, so I have in-between $190-$200 for the 5 pedals. I also bought a little mint tin (slides up with a tartigade on it) to hold picks. I also got some hardware (little feet and screw acorns plus felt pads) to keep the bottom of the board decent. Last I bought a skateboard bag pack on Amazon to keep it clean and all together. Had I gone with a board like this one, I could have shaved $60-80 off the overall price depending on how well I can buy patch cables for it ($25-$45 would be my guess for really good ones) with the same pedals. But visually the skateboard looks KILLER and it channels an early 2000s Garage Rock and Horror Surf sound! Last but not least, for my Main Board I have probably $2700 into that easily (I have different pedals I bought at different times and I bought professional grade cables, power bricks, and a power strip for it) and pedals ranging from name brand mini pedals to Standard pedals, to Elevated pedals, Modified pedals, and a few Boutique pedals. My OG board has mainly Standard pedals (with a Modified and two Mini name brand pedals) and that is more or less $500 but spread out over 20+ years. ALWAYS expect your pedal board to cost more than you think. It's just the nature of the beast. Also buy good cables, both patch and to the amp and guitar so you can get the most tone out of your setup!😉👍✨

Another great review! Thanks buddy